Flooring-manufacture,factory,supplier from China

What is Black Core HDF?    The Black Core HDF floor is a floor made of this carbon crystal.    Carbon crystal is a kind of microcrystalline carbon particles purified from minerals, commonly known as high carbon graphite.

MDF HDF Details  Size:1220*2440 1250*2500 or customized sizeThickness:1-30mmGlue:E0 /E1 /E2Material:Polar pine combiDensity:650-980 kg/m3Certificate:ISO, SGS, FSC,P2Moisture Content:4-6%Usage:for laminating board, furniture back panel, flooring, interior and exterior decorationMOQ:1X40HQPayment Term:T/T or 100% LC at sightPacking:Standard exporting palletsDelivery time:20 days after received dopositMDF HDF Properties    EN622-5:2009 MDF-GPPropertyTest MethodUnitRanges of nominal thickness (mm)1.8-2.52.5-44-66-99-1212-1919-3030-45＞45Swelling in Thickness 24 hEN317%45353

      Product performance of medium density board: uniform material, dense layer structure, smooth and smooth surface, not easy to deform, stable performance, smooth and delicate edges, not easy to collapse and delaminate; non-toxic, tasteless, non-radiative, and good air permeability.MDF is mainly used for: laminate flooring, door panels, partition walls, furniture, etc., and is mainly used for the surface of mixed oil process in home decoration.Xinhua Wood Factory Scene  Xinhua Wood Machinery  Xinhua Wood IntroductionGaotang County Xinhua Wood Industry Co.,

1. The use of particleboard in flooring:Particleboard is used as flooring material in temporary structures with less load. It is also widely used as a covering for hardwood floors because hardwood planks have low resistance to scratches to protect them. Wood veneer particleboard or laminated particleboard is used for floors where a finished aesthetic look is desired.2. Use of particleboard in floor underlayment:Particleboard is widely used as floor underlayment or as a basis for parquet, wooden or carpet floors.

  1. The characteristics of density board: the surface of density board is smooth and flat, the material is fine and dense, the performance is stable, the edge is firm, and the surface of the board is decorative. However, density boards have poor moisture resistance, and in comparison, density boards have poorer nail-holding power than particle boards. If the screws loosen after tightening, it is difficult to fix them again due to the low strength of density boards.2. The use of MDF: mainly used for laminate flooring, door panels, partition walls, furniture, etc.

      MDF is mainly used for laminate flooring, door panels, partition walls, furniture, etc. MDF is mainly used for surface treatment of oil-mixed technology in home decoration; MDF is generally used for furniture, because the density of high-density boards is too high. It cracks easily, so there is no way to make furniture.       Generally, HDF is used for indoor and outdoor decoration, office and civilian furniture, audio, and vehicle interior decoration. It is also a good material for packaging.

Medium Density Fiberboard Introduction:Density board, also known as fiberboard (full name: MDF fiberboard), is a man-made board made of wood fiber or other plant fiber, applied with urea-formaldehyde resin or other suitable adhesives. According to its density, it can be divided into high density board, medium density board and low density board. Mainly used for laminate flooring, door panels, partition walls, furniture, etc.

The main purpose of MDF FiberboardMainly used for laminate flooring, door panels, partition walls, furniture, etc. MDF is mainly used for surface treatment of oil-mixed technology in home decoration; MDF is generally used for furniture, and high-density boards are used for interior decoration. Exterior decoration, office and civilian furniture, audio, vehicle interior decoration, can also be used as anti-static floor in computer room and production material for wall panels, security doors, wall panels, partitions, etc. It is also a good material for packaging.

Xinhua Wood ProductsSpecification of  MDF for DecorationMDF BoardSize1220×2440mm or can be customized Thickness1mm-30mmMoisture6%-8%Core panelWood fiberColor wood color, surface can be made with different treatmentSurfacematt,embossed, glossy, leather,wave,synchronize etc...GlueE0/E1/E2/CARB P2/F4Applicationkitchen cabinets, wardrobe door, shoes cabinet, TV cabinet, funiture boardsMOQ1*20GP containerFree SampleAvailable at any timePackaging DetailsPackage of 4x8 MDF Board with 18mm thickness ;Items per Carton: 50 Pieces / Pallet;Items per Container: 8 Pallets / Contain

Carbon crystal panels have many advantages, including:1. Strong durability: carbon crystal plate has the characteristics of high strength and wear resistance, and can maintain its original performance and appearance in long-term use.2. Ultra-thin and light: the carbon crystal plate is very thin and light in weight, which can reduce the weight of the overall decoration material, and is also easier to transport and install.3.

App Features:Because of the three-layer criss-cross structure, Ozon board is more uniform than ordinary particle board, has better toughness, strong nail holding power, and is not easy to swell when it is damp. It is used as a house structure abroad and is strong. But it is relatively thick, the surface is uneven and difficult to handle, and it is rarely made into furniture.  When Ozon board came to China, it has almost become an upgraded substitute of large core board, with good quality and high price. It is especially suitable for the base layer of the background wall.

Everyone knows that density board is widely used in making furniture or decorating partitions because of its uniform structure, fine material, stable performance and easy processing. Everyone is curious, how to distinguish the quality of density board?Let me tell you something.1. Surface cleanliness: There should be no obvious particles on the surface of the density board with good surface cleanliness. Particles are caused by impurities brought in during the pressing process, which not only affects the appearance, but also makes the paint film easy to peel off.2.

The benefits of MDF:Good flexibility (Because the door panel is often pushed and pulled to open and close, if it is too hard, it will easily lead to cracking, so this advantage of MDF can just be used)Easy to shape (because it is a powder structure, and very flat and smooth, so it is easy to shape, which just meets the needs of consumers for different shapes of door panels)Xinhua Wood Factory Appearance  Xinhua Wood Storages  Xinhua Wood Machinery  Xinhua Wood Quality Certificates  Xinhua Wood Factory IntroductionGaotang County Xinhua Wood Industry Co.,

    Density board is made by soaking wood, tree branches and other objects in water and then heat-grinding, paving and hot-pressing. It is made of wood fiber or other plant fiber.Man-made panels made by applying urea-formaldehyde resin or other suitable adhesives. Of course, the glue contains two chemicals, benzene and formaldehyde.

Is MDF or solid wood particle board better? Compare the advantages and disadvantages of the two:MDF:Advantages: The material is delicate, the edge sealing of the cutting surface is well done, it is not easy to open the glue, and it is convenient to make various shapes, so it is often used to make door panels or back panels.2. Disadvantages: The base material is powder, and the glue used is more than particle board, so it is easy to have environmental protection problems.

      The Invention of Wood-based Panels     The invention of wood-based panels can be traced back to 3000 BC. At the beginning of the 1st century BC, the Romans were already familiar with veneer manufacturing technology and plywood manufacturing principles.     In 1812, the French invented the veneer sawing machine.     In 1834, France issued a planer patent.     After 1844, the improved rotary cutting machine was officially used in industrial production.

How is the quality of MDF furniture?        1. Density board is a man-made board made of wood fiber or other plant fiber and applied with urea-formaldehyde resin or other suitable adhesives. Because of its soft quality, impact resistance, high strength, uniform density after pressing, it is easy to reprocess, but the disadvantage is poor water resistance.        2. The density board is easy to be finished and processed. All kinds of paints and paints can be evenly coated on the density board.

     It is said that wall panels originated in England in the 16th century. Everyone knows that the climate in England is cold and humid. In order to block the damp and cold lower part of the wall, wall panels are used for insulation.    Another theory goes back to the Netherlands in 1300. At that time, Europe was in the dark Middle Ages, and knights wearing armor and holding long swords often scratched the walls of castles or palaces inadvertently. Protect with wood.     At the beginning, wall panels were mainly used in castles and palaces.

FeaturesThe density board surface is smooth and flat, the material is fine and dense, the performance is stable, the edge is firm, and the surface of the board is very decorative. But the density board has poor moisture resistance. In contrast, the nail-holding force of MDF is worse than that of particleboard.

Advantages of MDF     1. The material is relatively thin, and the cutting surface will be sealed well when sealing the edge, so that it will not be easy to open the glue.     2. It is easy to press into various shapes, and it is easy to make shapes, so there are usually more door panels or back panelsXinhua Wood Factory Appearance  Xinhua Wood Machinery   Xinhua Wood Storages  Xinhua Wood Quality Certificates  Xinhua Wood IntroductionGaotang County Xinhua Wood Industry Co., Ltd.

National Standard for Medium Density FiberboardMedium density fiberboard is a kind of man-made board with a density of about 0.5-0.88gcm3 after processing selected wood raw materials into fibers, adding urea-formaldehyde resin and other additives, and making it through a special process.

FeaturesThe density board surface is smooth and flat, the material is fine and dense, the performance is stable, the edge is firm, and the surface of the board is very decorative. But the density board has poor moisture resistance. In contrast, the nail-holding force of MDF is worse than that of particleboard. If the screws loosen after tightening, it is difficult to fix them at the same position.The main advantage1. Density board is easy to be painted. All kinds of paints and paints can be evenly coated on the density board, which is the first choice for paint effect.2.

     Density board, also known as fiberboard, is an artificial board made of wood fiber or other plant fiber by hot pressing after slicing, cooking, fiber separation, and drying, then applying urea-formaldehyde resin or other suitable adhesives.     The biggest advantage of MDF (medium fiberboard) is that it can be used for carving, engraving and milling, so as to make various shapes.

FeaturesThe density board surface is smooth and flat, the material is fine and dense, the performance is stable, the edge is firm, and the surface of the board is very decorative. But the density board has poor moisture resistance. In contrast, the nail-holding force of MDF is worse than that of particleboard. If the screws loosen after tightening, it is difficult to fix them at the same position.The main advantage1. Density board is easy to be painted. All kinds of paints and paints can be evenly coated on the density board, which is the first choice for paint effect.2.