hello-manufacture,factory,supplier from China

What is the main reason for the deformation of density board?The main reason for the deformation of the density board is the production process or the storage and use process.1.

    HDF Fiberboard has a wide range of uses, and can be used instead of general boards in construction, furniture manufacturing, ships, and aircraft. Such as wall panels, floors, cement formwork, ceilings, hollow door panels, furniture panels, etc.        1. Furniture manufacturing: At present, fiberboard is mainly used to replace natural wood for furniture production. It can produce all kinds of panel combination furniture or disassembled furniture.        2.

          High-density fiberboard (English name: High Density Fiberboard, abbreviated as HDF) is a board made of wood fiber or other plant fiber, applied with urea-formaldehyde resin, or other synthetic resins under heat and pressure.          The most advanced flat pressing complete production line in the world. Therefore, the physical performance is higher and better than that of medium-density fiberboard, and its density is usually above 800kg/M3.

  According to their different densities, they are divided into high-density boards, medium density boards and low-density boards. Due to its soft and high impact strength, the density of the density board is uniform after being pressed, and it is also easy to reprocess. It is a good material for making furniture in foreign countries,but its disadvantage is poor water resistance.

1. The use of particleboard in flooring:Particleboard is used as flooring material in temporary structures with less load. It is also widely used as a covering for hardwood floors because hardwood planks have low resistance to scratches to protect them. Wood veneer particleboard or laminated particleboard is used for floors where a finished aesthetic look is desired.2. Use of particleboard in floor underlayment:Particleboard is widely used as floor underlayment or as a basis for parquet, wooden or carpet floors.

What are the characteristics of high-strength particleboard?The high-strength particleboard adopts the two-stage chipping technology combining the drum chipper and the shaving chipper. The size of the shavings produced by this technology is rich, and it is very easy to change the length of the wood chips. It can effectively use small-diameter materials and save wood resources.

The reason for the deformation of density board furniture is here?    We all know that MDF has a wide range of applications. However, furniture made of this kind of board often has such a problem: the furniture board is deformed, which is very annoying.It not only seriously affects the normal use of our furniture, but also has a bad influence on family life. We knowThere are many reasons for this problem, and we will introduce them in detail below.1.

Product performance  The most advanced flat pressing production line in the world. Therefore, the physical performance is higher and better than that of MDF. Its density is usually above 800kg/M3. The high-density fiberboard produced has reached 930kg/M3, which has reached the advanced level of similar products in Europe and America.   The board surface texture is fine and smooth.

The main purpose of MDF FiberboardMainly used for laminate flooring, door panels, partition walls, furniture, etc. MDF is mainly used for surface treatment of oil-mixed technology in home decoration; MDF is generally used for furniture, and high-density boards are used for interior decoration. Exterior decoration, office and civilian furniture, audio, vehicle interior decoration, can also be used as anti-static floor in computer room and production material for wall panels, security doors, wall panels, partitions, etc. It is also a good material for packaging.

      MDF is mainly used for laminate flooring, door panels, partition walls, furniture, etc. MDF is mainly used for surface treatment of oil-mixed technology in home decoration; MDF is generally used for furniture, because the density of high-density boards is too high. It cracks easily, so there is no way to make furniture.       Generally, HDF is used for indoor and outdoor decoration, office and civilian furniture, audio, and vehicle interior decoration. It is also a good material for packaging.

     Our maximum important merchandise include: MDF, Finished MDF, HDF, particle board, with many superior imported equipments and production lines, clearly supplying capability now not less than 30000 cubic meters monthly.     All manufacturing nicely adapt to the USA, India, Middle-east, South Asia, Europe, Center & South America, many countries and regions, nicely used and in shape for furnishings, decorations and creation industries.Size1220*2440mmThickness12mmCertificationFSC, CE, ISOMOQ20 CbmDensity600-700 Kg/CbmGlueWBP Mdi Phenolic E0 E1 E2Moisture6-8%T

     In foreign countries, density board is a good material for making furniture. Density board can be selectively used to make furniture products. When we choose and buy, it is best to choose brand products. We all know that density boards are not good at holding nails, so we need to use a lot of glue for bonding when making furniture. , so we need to detect the content of formaldehyde. Density furniture uses wood-based panels as its inner material, so its material is not easy to deform, and it will not be infested with insects.

Product performance    The most advanced flat pressing production line in the world. Therefore, the physical performance is higher and better than that of MDF. Its density is usually above 800kg/M3. The high-density fiberboard produced has reached 930kg/M3, which has reached the advanced level of similar products in Europe and America.     The board surface texture is fine and smooth. When the ambient temperature and humidity change, the size stability is good, and the surface decoration treatment is easy.

  1. The characteristics of density board: the surface of density board is smooth and flat, the material is fine and dense, the performance is stable, the edge is firm, and the surface of the board is decorative. However, density boards have poor moisture resistance, and in comparison, density boards have poorer nail-holding power than particle boards. If the screws loosen after tightening, it is difficult to fix them again due to the low strength of density boards.2. The use of MDF: mainly used for laminate flooring, door panels, partition walls, furniture, etc.

Carbon crystal panels have many advantages, including:1. Strong durability: carbon crystal plate has the characteristics of high strength and wear resistance, and can maintain its original performance and appearance in long-term use.2. Ultra-thin and light: the carbon crystal plate is very thin and light in weight, which can reduce the weight of the overall decoration material, and is also easier to transport and install.3.

      Product performance of medium density board: uniform material, dense layer structure, smooth and smooth surface, not easy to deform, stable performance, smooth and delicate edges, not easy to collapse and delaminate; non-toxic, tasteless, non-radiative, and good air permeability.MDF is mainly used for: laminate flooring, door panels, partition walls, furniture, etc., and is mainly used for the surface of mixed oil process in home decoration.Xinhua Wood Factory Scene  Xinhua Wood Machinery  Xinhua Wood IntroductionGaotang County Xinhua Wood Industry Co.,

Our Services:1. All inquires will be replied with 24 hours;2. Sample charge will be REFUNDED after you placed order;3. Strictly Quality Control by Professional QC Team;4. Factory Direct Competitive Price, One Stop Service, OEM Service Offered;5. Various Designs, Sizes & Colors are available;6. Selected High Quality Raw Material, Aesthetic appearance, High-End finishes;7. We can supplied EXW,FOB,CIF,DDU shipping terms;8.

Is MDF or solid wood particle board better? Compare the advantages and disadvantages of the two:MDF:Advantages: The material is delicate, the edge sealing of the cutting surface is well done, it is not easy to open the glue, and it is convenient to make various shapes, so it is often used to make door panels or back panels.2. Disadvantages: The base material is powder, and the glue used is more than particle board, so it is easy to have environmental protection problems.

Advantages of OSB BoardOSB (Oriented Strand Board) is a composite board made of wood veneer or strands, which has many advantages, these advantages include:1.Strength and Durability: OSB board is constructed of interlaced veneer veneers, making it stronger than traditional particle board. It is able to withstand greater loads and pressures and has better resistance to tearing, making it more durable.  2.Stability: Due to the way OSB panels are constructed, they are not susceptible to moisture and deformation.

An Introduction to OSB Board      OSB is Oriented Strand Board ,the upgrading of traditional particle board.

Oriented Strand Board Introduction:Oriented strand board (OSB), also called European pine board, is made of small diameter wood, interfelled wood, wood core, board veneer, branch Y wood, etc., and processed into 90-130mm long, 5-30mm wide and 0.5mm thick strands in the direction of wood grain by special planing equipment (long wood planer or two-stage chipping planing equipment), then dried, glued, and formed in the prescribed direction by hot pressing.

Everyone knows that density board is widely used in making furniture or decorating partitions because of its uniform structure, fine material, stable performance and easy processing. Everyone is curious, how to distinguish the quality of density board?Let me tell you something.1. Surface cleanliness: There should be no obvious particles on the surface of the density board with good surface cleanliness. Particles are caused by impurities brought in during the pressing process, which not only affects the appearance, but also makes the paint film easy to peel off.2.

How is Xinhua Wood MDF Board?    Xinhua Wood MDF board use fresh polar pine willlow or combi hardwood as raw material, advanced equipments mature production technology, strict quality control systerm , always a pre-production sample and check quality before packing, which ensure good quality and Xinhua Wood has 4 production lines , monthly output 50000 cbm, with sufficient stocks ,can deliver in 15-25 days.MDF Product DisplayThe Usage of MDF Fiberboard Furniture manufacturing: At present, MDF is mainly used to replace natural wood for furniture production.

Characteristics of OSB1. Wide sources of raw materials and low prices.The raw materials of directional particle board are mainly small diameter wood of soft coniferous wood and broad-leaf wood, fast-growing thinning forest, such as eucalyptus, Chinese fir, poplar thinning wood, etc., with a wide range of sources.2. High output rateCompared with other types of wood-based boards, oriented particle board has a higher output rate.